Give Feedback
4
API stream pauses
In Progress
2
My stream of data will sometimes pause. I checked my wifi the connection is good and I check the neurosity console and the brainwaves screen doesn’t show anything. It’ll pause for like 20 seconds then go back to normal. This is the first time I’ve observed this.
1
If multiple devices connect to the same Crown via Bluetooth, all devices disconnect
Open
0
(no description)
2
Enhance battery level gauge/meter
In Progress
6
The battery level will drop from 100 to 75 (for example) if I reboot the device. This was fixed in hardware and needs a firmware update to fix for the crown only and not notion 2.
Neurosity OS Bug Reports
6
Multiple profiles
2
It would be nice if you could have multiple profiles so the whole family can use the crown without needing a smart phone for each person. One account, and a drop down for each member in the family. Or even a guest/friend to try it out.
3
First time user UX/Walkthrough
0
The first-time user should be asked which N (3-5) categories of music do you like (rock, low fi, ambient, electronic, etc…) for their first listen-through. We already pre-picked which song they will listen to because we know which song has the lowest first-time user churn for each category. After th...
3
Show brain waves in signal quality screen
0
Improved UX by overlaying the EEG, maybe a summation of the EEG into one single stream, but show the user that the device is real and working, also can help with getting better signal quality.
2
Headset 2.0
Prioritized
1
if I look down at my phone, the app thinks I’m looking down, I think if you should look for a hold in the correct position for 2 seconds, e.g app sees headset out of ideal position, alerts user to look ahead, when user looks ahead, they can see which way to move the headset, they position the headse...
1
Neuro Acoustic tracks
0
I think, it would be a great addition if neuro acoustic tracks are available in the app which stimulates gamma brain waves.
3
Continuous shift sessions?
0
Currently after a shift ends, the song stops and you have to open the app again then chose another song. I think this flow breaks the shift a bit. Wonder if it’s possible to add a setting where you can “sustain a shift”. This’ll keep the song playing/add another one even after a “shift was recorded”...
Neurosity Mobile App Feature Requests
1
Issues with meditation voices
4
Switching voices from Emily to Riya to test the different available options it took a couple of minutes to load the tracks (stuck at 99%, but maybe that was just my 4G network?) and then, when the session started, instead of the clear voice I could only hear high volume white noise (music was OK)! I...
1
App stuck on device position screen
0
The Crown finished updating and showed up online, so I went to a session, and now the app is stuck on the device position. This was my first time using the app on android, not sure if this is from app or headset.
1
Congraulating me on my first streak too much
0
multiple times a day, multiple days in a row, even tho it’s not my first streak. i did recently enable notifications, and now the app won’t stop telling me good job for getting a streak. show me once please, but stop showing me every time i open the app.
1
Cannot join Crown WiFi network
0
I’m unable to use the App to add my device to a WiFi network. I had to do it through settings. As soon as I click on the join, a flash happens, and nothing else. Video: https://drive.google.com/file/d/10fJr6ZaivlZeEX1L1vIuDEjodSq5X8_w/view?usp=sharing
1
83 on signal quality is not good data
0
Hi! I was wearing my crown with medium length electrodes, and my hair has grown a bit, but my signal quality was pinged on 83. When I went over to the developer console to look at the brainwaves, I saw periodic sine wave in every channel, which is a bad situation. I swapped in large electrodes and m...
Neurosity Mobile App Bug Reports
1
Visual issues in Local Mode
2
When in Local Mode, I cannot see any plots at all. Is it by the design?
1
Y axis in Datasets is wrong
0
I think there is a bug in the Y axis. Between the 0.4 and 0.2 points in the screenshot attached, there is a number 3e+0. The result of 3e+0 is 3, and it should not be between 0.4 and 0.2. Thank you
1
Chrome browser gives "out of memory" error
0
After some general training and testing the page switches to the attached screenshot and has to be reloaded in order to continue. This particular screenshot happened after about 10 training repetitions.
1
Console stutters and stops working after some hours of use
0
We noticed the console gets slow to the point it’s unusable after a couple of hours of continuous usage, maybe WiFi related issue? We solved by rebooting both our Crowns and the router. It is worth noting that is a 4G unit (https://www.tp-link.com/it/home-networking/3g-4g-router/archer-mr600/) and n...
1
[Dataset View] Set chart to local timezone to be the same with dataset time
0
Love the dataset view! Would it be possible to set the time on the chart view to be in the same timezone as the time on the top left for the dataset. (bonus) Would be interesting if this view had links to how to interpret different frequency bands for people trying to use it. (I know it’s researcher...
2
Test recording issue
0
I started a 30 minute recording in the Test tab. Then, I switched to the Brainwaves tab. When I switched back, there was no Test running.
Developer Console Bug Reports
5
Enable onboard processing with client-side algorithms
Open
2
Short description: Enable relocation of client-side raw data processing to the onboard CPU. Why this feature: Until now, the raw data can only be accessed via streaming - either using the SDK which is currently implemented over a websocket/ Firebase or using streaming technologies like LSL. This fea...
1
T7 T8 to be used as placements
Open
1
It would be very helpful if T7 and T8 could be used as active sensor placements and not just reference placements.
Neurosity OS Feature Requests
No feedback yet
Neurosity Music Bug Reports
3
Smooth transitions between tracks
Open
0
I’d love to be able to have the songs mesh together, sometimes the transition can be rough between songs.
4
Support for platforms beyond Spotify
Open
0
Prior discussion Examples include: YouTube Music (formerly Google Play Music) Pandora Apple Music (formerly iTunes) Tidal
1
Save playlists
Open
0
Would it be possible to be able to save somehow, somewhere, the music suggestions from Spotify as playlists to use when wearing the headband is not possible?
Neurosity Music Feature Requests
6
A guide of calculation of scores, different signals
Open
1
It would be great to have guide which explains the basics behind these signals, how scores are calculated, what can one do with it, different possibilities
1
Document method to improve contact on frontal nodes with longer sensors - #divergence
Open
0
Add to documentation that users should try longer sensors on frontal nodes if contact with the head is sketchy.
1
A guide for porting from Notion DK1/2 to Crown
Open
0
There should not be much difference except for channel order. E.g. As a programmer, teach me how to dynamically parse incoming data based on notion.getInfo() channelNames Crown: channelNames: CP3, C3, F5, PO3, PO4, F6, C4, CP4 Notion 2: channelNames: CP5,F5,C3,CP3,CP6,F6,C4,CP4
Documentation Requests
3
Time line in Electroencephalogram
Open
0
Would it be possible to add vertical time lines (per second) to the encephalogram at the Brainwaves page?
7
Signal Quality UI Update
Open
2
Currently there’s no way to tell what electrode on the head needs adjustment. Suggestion: maybe adding the “channel” as a label under/above each circle so users know which electrode needs better fit. Or. Go big with a 10-20 system type visualization with circles on the different electrode placements...
1
Conversion to BDF instead of EDF
Open
0
Hi - We did a check of conversion of CSV files to BDF and found it reconciles with original CSV when the BDF is read back. EDF fails to convert the data from CSV file and it is because EDF is 16bit, however BDF is 24bit. It is an easy fix, simply use BDF library. https://gitlab.com/KrishnaGandhi/eeg...
2
Ability to use Shift from either the console or a standalone app
Open
0
I would like the ability to use the Crown to Shift while working on my PC, but not be required to use my phone for this as that is very inconvenient.
4
Auto download of csv data
Open
0
When the brain experiments ends, may be we can automatically download the data instead of going to select what format you wanna download into.(setting preferred way of download). This idea came while we were doing experiment in one of your company’s project.
1
Full control of Activity Log / Snaphsots
Open
0
It would be nice to get complete control over Activity logging and snasphots with some extra buttons in order to: start / stop the snapshot manually to get full control of current session (or manage multiple separated sessions) – bonus: download as PNG pic populate the activity grid with snapshots t...
1
Manual Console Chart Scaling
Open
0
On the Neurosity Console, it is possible to see the raw EEG but it is not possible to define the scaling ourselves. It is only possible to have autoscale on or off. It would be better for us if we could determine the scaling ourselves and enter manual values for the charts.
Neurosity Developer Console Feature Requests
2
Midline Sites
Open
1
Hello, we are using the crown for our platform for neurofeedback. I love the crown so far and the parietal coverage is great. I am curious if we can eventually add an axu sensor that would allow us to access midline structures (PZ,CZ,FZ). The cingulate is essentially the bridge between the conscious...
3
Add possibility for auxiliary electrode via the Thunderbold port
Open
0
For some implementations, the reference sensor being at site T7 is not ideal, as considerable electroencephalographic signal is effectively subtracted out. If it were possible to add an auxiliary electrode input (e.g., via the Thunderbold port, as some have done w/ the Muse headset - e.g., https://h...
1
Increase healthy data to 80Hz+ (up from 45Hz)
Open
0
Looks like right now the 256Hz sampling rate and the non-stationarities in 60Hz line noise are colluding to make viable data limited to <45Hz. Low gamma runs 35-80; it’d be nice to measure gamma. See here: https://discord.com/channels/635812828481323028/758768656846553138/942922342781292584
1
Over extending wings leads to broken hinges
Open
0
Tracking broken hinges. If you suffer from a broken hinge, contact suport@neurosity.co
2
Improve shipping damage protection
Open
0
A couple of crowns have arrived damaged on shipping. If it happens to you, contact support@neurosity.co and we’ll immediately get you a replacement with a return label. The cracked outer band
Crown Feedback
1
core-js deprecated
0
there is a warning npm install @neurosity/sdk dotenv npm WARN deprecated core-js@3.6.5: core-js@<3.23.3 is no longer maintained and not recommended for usage due to the number of issues. Because of the V8 engine whims, feature detection in old core-js versions could cause a slowdown up to 100x ev...
1
Python SDK. class NeurositySDK. firebase.initialize_app - method doesnt exist
0
I used Buildozer on my Python program to get APK file but app is crashing on the phone. While debugging, I found and indeed I can’t find initialize_app method of firebase. It is one but in firebase_admin. I am not the best in coding, so I can’t help myself, but count on your help. 10-22 17:31:10.831...
6
Unity and Unreal SDK and Example Projects
8
Hello, I am an experienced game designer and I have some programming notions, but the current third party plugins are either outdated or difficult to implement into a game engine without some serious programming knowledge. The Crown is itself quite easy to plug and play. I would like to have availab...
1
Add single signal quality number to Neurosity SDK
0
Currently, notion.signalQuality() outputs arrays. It would be handy if it also exposed the 0-100 signal scale used in the Neurosity dashboard (unsure how to calculate the equivalent)
Neurosity SDK
1
Store
Open
0
Right now we can only navigate to purchase the crown. I recommend having a section for add-ons so customers can see everything extra that is available. Like the travel case, or extra cords and the like.
Neurosity Website Feature Requests
1
Add: Crown sample rate as default option
0
The Emulator is modeled after gen 2 (Notion 2) which has a different sampling rate (250Hz).
Emulator Feature Requests